3 routes · 29 controlled steps · LOBA + WAKOL
Choose the condition of your floor. Each procedure connects the preparation, the tool, the product, the checkpoint and the mistake that brings the work to a halt.
Procedure 01 · old parquetRestoration is not just sanding. First you stop the movement, then you build an even sanding pattern, close the stable gaps and only then choose a LOBA lacquer or oil.
stabilise → sand → fill → finish → maintain
Open the full procedure
Procedure 02 · new unfinished parquetWith new unfinished parquet two systems work together: WAKOL below holds the geometry, LOBA above determines the appearance and the resistance.
measure → prepare → set out → bond → sand → protect
Open the full procedure
Procedure 03 · multi-layer engineered parquetEngineered parquet is normally neither sanded nor lacquered after installation. Every stain, height difference or bit of damage therefore stays visible — which makes discipline with the adhesive even more important.
confirm the instructions → measure → set out → bond cleanly → maintain correctly
Open the full procedureType of substrate, moisture, flatness, the construction of the parquet and the existing coating.
WAKOL preparation and bonding below; LOBA appearance, protection and care above.
Consumption, time windows, checking the transfer and documented curing.
Last updated: